Real Worlds - Street Furniture Model Process

 

Street Furniture Model Process

Metal Door Modelling Process :

Each section of these models process is different screenshots showcasing the original process of each model and how it was slowly built up starting off with my metal door having the centre panels being constructed first.

Then creating the framing of the door which is holding the entire door together keeping the design compact and adjusting the length and width of the centre metal panels to fit the design.

Still working on the frames of the with creating these small metal pieces connected to the framing by a metal sheet

Finalised this model by creating the roofing sealing the entire model together and creating the set of activation buttons on the back panel of the doors framing which would allow the door to be forced shut during a meltdown inside of the lab.

Finalised Render inside of Substance Painter

Textured utilising the different preset textures inside of Substance Painter

Implemented into my Final Environment Model

Screenshot of my Metal Door being implemented in the final environment I made for the end of this years project.

Broken Capsule Modelling Process

Starting off my original concept build for my capsule by creating the ends each way of model and creating enough space in-between to separate the glass.

Next step creating the glass by taking different vertices and shifting them till I got the required shape I wanted and then repeated this throughout the glass process.

To create these original wire designs , I used a combination of the ep curve tool and the extrude tool to create these different lengths of wires and then duplicating them changing the design on the bottom half.

Finalised Render inside of Substance

Textured utilising the different preset textures inside of Substance Painter

Implemented inside of my finalised model

Screenshot of the two different instances that I used my glass design for each room as I used the feedback I got during the sketch phase of these capsules and created a room filled with shattered capsule heads as if multiple creatures have caused escape attempts. 

During my second instance , I replaced the shattered glass and replaced this with a clean version as if this capsule is prepared for an experiment to occur.

Electrical Breaker Modelling Process

This Model is completely has elements of its model redesigned which is more noticeable once placed into my finalised mode with slowly building the centre box which would contain the separate pieces inside the electrical panel.

Creating the side where I wanted this set of cables to come out of , I used the booleans tool to create holes in the box for these cables to slide through however whilst these cables are straight forward here they are going to be changed by the end of the project.

Started to finalise this design by creating the last details such as the warning sign before u open the box to switch off the breaker and designing the pull switch handle which was designed as a safety measure encase of emergency.

Final Render inside of Substance

Textured utilising the different preset textures inside of Substance Painter

Implemented into my Final Environment Model

Finally the showcase of my model being inside of the finalised environment for this project with changes for the final design such as using the ep curve tool to create new cable designs and creating a new model showcasing the inside working of the breaker which I'm proud of since I haven't really modelled electrical interworking's before.